For the purpose of this article, the words and phrases used herein shall have the meanings ascribed to them in this section, unless the context clearly indicates to the contrary.

(a)   Approved - shall mean approved by the chief building official, the electrical inspector or his or her designee.

(b)   Authorized person - shall mean any individual, firm or corporation who or which is licensed under the provisions of this article to do the work as permitted under the specified provisions of this article.

(c)   City - shall mean the territory within the corporate limits of this city.

(d)   Conductor - shall mean a wire or cable or other form of metal suitable for carrying the electric current or potential.

(e)   Electrical construction or installation - shall mean and include all work and materials used in installing, maintaining or extending a system of electrical wiring and all appurtenances, apparatus or equipment used in connection therewith, inside or attached to any building, structure, lot or premises, except industrial plants where full-time maintenance is provided and other agencies providing inspections of installations and facilities. Electrical construction shall not be held to mean or include any of the following:

(1)   The replacement of lamps, fuses, bulbs or the connection of portable electrical equipment to suitable permanently installed receptacles and replacement of receptacles and switches, lighting fixtures and apparatus where no changes or alterations are made to the wiring;

(2)   Any work involved in the manufacturing, repair or testing of any electrical equipment or apparatus, but not including any permanent wiring; or

(3)   Any work in industrial establishments where inspections come under the scope of other inspection agencies.

(f)   Equipment - shall mean conductors, materials, fittings, devices, appliances, fixtures, apparatus, motors and the like, used as a part of or in connection with an electrical installation.

(g)   Inspector - shall mean the chief building official or any individual who has been appointed by the city as electrical inspector.

(h)   Person - shall mean a natural person, his or her heirs, executors, administrators or assigns, and also includes a firm, partnership or corporation, its or their successors, assigns, or the agent of any of the aforesaid.

(i)    Special permission - shall mean the written consent of the chief building official or the electrical inspector.

(j)    Special ruling - shall mean a written ruling filed in the office of the chief building official or the electrical inspector.

(Code 1990)

The National Electrical Code, Edition of 2014 (NFPA No. 70-2014), a standard of the National Fire Protection Association, for electrical wiring and apparatus as recommended by the National Fire Protection Association, the same being a standard code for the installation of electrical wiring and apparatus and available in book or pamphlet form from the: National Fire Protection Association, One Batterymarch Park, Quincy, MA 02269 and copies of which have been and are now filed with the City, shall be and is adopted by reference thereto as authorized by K.S.A. 12-3009. Such code shall be the minimum standard for all electrical work done or performed under the provisions of this article, except as hereinafter provided.

(Ord. 1207; Code 2005; Ord. 1425; Code 2022)

Article 200, Section VI, Service Equipment-Disconnecting Means, on page 89-91, to read as follows:

230-70. General. Means shall be provided to disconnect all conductors in a building or other structure from the service entrance conductors. Each such disconnecting device shall be permanently marked to identify it as a service disconnecting means and shall be of a type that is suitable for use as service equipment under prevailing conditions. Service equipment installed in hazardous locations shall comply with the requirements of Articles 500 through 517. Outside weatherproof, overcurrent, and service disconnects shall be required on all permanent electric installations; provided, however, that the electrical board of examination and appeals may grant exceptions for services which exceed 400 amperes.

(Ord. 1207; Code 2005; Ord. 1425; Code 2022)

The city superintendent or his or her authorized designee shall be responsible for the administration and enforcement of this article and appointment of an electrical inspector in accordance with section 4- 104 of this chapter, which shall apply in a like manner to this article.

(Code 1990)

The city superintendent may assume the responsibilities of or appoint some other person to be and perform the duties of electrical inspector as may be required, subject to the consent and approval of the governing body.

(Code 1968, 3-306; Code 1990)

The electrical inspector shall have the following duties:

(a)   To enforce all regulations relating to electrical construction, alteration, repair or removal;

(b)   May permit, with the approval of the governing body, on the basis of duly authenticated reports from recognized sources, the use of new materials or modes of electrical construction, not provided for in this article, and may, for the purpose of carrying out the intent of this article adopt an accepted standard of material or workmanlike practices of federal or state bureaus, national, technical organizations or fire underwriters;

(c)   To examine all buildings requiring electrical construction in the process of erection, construction, alteration or relocation in the city for the purpose of determining whether the work is in compliance with the permit given and in compliance with the regulations of the city pertaining to such work, including zoning regulations; and

(d)   To keep comprehensive records of applications, of permits or certificates issued, of inspections made, of reports rendered, and of notices or orders issued. All such records shall be open to public inspection during stated office hours, but shall not be removed from the office of the building official or electrical inspector without his or her written consent.

(Code 1968, 3-306,310; Code 1990)

The electrical inspector shall have the following powers:

(a)   To enter any building or structure or premises at any reasonable hour, whether complete or in the process of erection, to perform the duties contained in this chapter;

(b)   To adopt and enforce all such prudent emergency measures as he or she may deem necessary and expedient for the public safety under the laws of the city;

(c)   May cause any work done in violation of this chapter to be discontinued until he or she shall have satisfactory evidence that the work will be done in accordance with the electrical regulations of the city, subject to the right of any installer or owner to appeal to the governing body.

(Code 1968, 3-306; Code 1990)

The electrical inspector, or his or her agent, upon proper identification, shall have authority to enter any building, structure or premises at any reasonable hour to perform his or her duties as set out in this chapter.

(Code 1968, 3-306; Code 1990)

(a)   The governing body shall be the final determiner of the scope and meaning of all provisions of the electrical code which may be unclear, ambiguous, or requiring interpretation.

(b)   The electrical inspector shall have power to modify any of the provisions of the electrical code upon application in writing by the owner or lessee or his or her authorized agent, when there are practical difficulties in the way of carrying out the strict letter of the code. In approving modifications, the electrical inspector shall see that the spirit of the code is observed, public safety secured and substantial justice done. The particulars of a modification when granted or allowed and the decision of the inspector thereon shall be entered upon the records of the electrical inspector and a signed copy shall be furnished to the applicant.

(Code 1990)

(a)   Except as provided in subsection (c), it shall be unlawful for any person to engage in any electrical construction as defined in section 4-201 within the city without an electrical permit being first obtained therefor from the city superintendent, after approval by the chief building official or his or her duly authorized assistant. The application for such permit shall be made and the permit obtained before any electrical construction work is commenced.

(b)   An application for a permit shall be deemed to be abandoned 180 days after the date of issuance, unless such application has been granted or the application pursued in good faith. However, the building official is authorized to grant one or more extensions of time in periods of 90 day increments for good cause shown. Such extensions shall be requested in writing and basis for the request detailed within the request. Applications for a permit and applications for extensions are subject to fees as set forth in the fee schedule of the City of Ellis.

(c)   No electrical permit shall be required for any of the following:

(1)   The replacement of lamps, fuses, bulbs, or the connection of portable electrical equipment to suitable permanently installed receptacles and replacement of receptacles and switches, lighting fixtures and apparatus where no changes or alterations are made to the wiring;

(2)   Any work involved in the manufacturing, repair, or testing of any electrical equipment or apparatus, but not including any permanent wiring; or

(3)   Any work in industrial establishments where the issuance of electrical permits come under the scope of other agencies.

(Code 1968, 3-302,304; Code 1990; Ord. 1413; Code 2022)

(a)   An electrical permit shall be issued, in writing, upon application to the building inspector or his or her designee, on a form or forms provided for the purpose. This application shall, among other things, disclose the following:

(1)   The name of the owner of the lot or tract of ground;

(2)   The location of the building or structure;

(3)   The electrical construction work proposed;

(4)   The class of occupancy;

(5)   The class of electrical construction;

(6)   The kind of materials to be used;

(7)   The estimated cost of the work;

(8)   The date work will commence;

(9)   Expected date of completion;

(10) Name and address of electrical contractor or contractors doing the work;

(11) Such other information as may be pertinent to the issuance of the required permit.

(b)   An application for an electrical permit shall be signed by the owner or his or her duly authorized agent, or an electrician or electrical contractor licensed by the city. If the application is made by the owner or his or her agent, it shall contain the name or names of the licensed electrician or electrical contractor or contractors doing the work described, or an electrical permit may be issued to the owner upon his or her application disclosing satisfactory evidence that the proposed work will be performed by the owner, himself or herself and not by a licensed electrical contractor, and likewise subject to the final approval of the electrical inspector for work performed.

(c)   Upon approval of the completed application and a determination that a permit should be issued, the chief building official or his or her assistant shall issue a permit to the owner, electrician or electrical contractor authorizing the electrical construction work covered by the application.

(d)   Any permit issued under this section shall be valid and subsisting for a period of not more than six months from the date of issuance unless the permittee shall have commenced, within the period so limited, the electrical construction work authorized by such permit. Electrical construction work commenced, for the purpose of this section, shall mean the beginning of electrical construction work other than the preparation of plans or the letting of an electrical contract.

(Code 1990)

Whenever an application for an electrical permit is made, the chief building official or the electrical inspector may, if he or she finds it necessary to determine whether electrical construction work described in the application will comply with the laws pertaining to such work, require that the applicant file a written description or drawing of the proposed electrical construction as may be prepared for the purpose. If such drawing or description is insufficient for the purposes of determining whether a permit should be issued, the building official may require the applicant to file complete electrical and engineering plans and specifications for such electrical construction, or any part thereof, as may be necessary for the inspector to determine compliance with this article. The filing of such plans and specifications and the approval thereof in connection with an application for a permit shall not in any way affect the authority of the city to deny or issue a permit, or to inspect any electrical construction work for conformity with this article.

(Code 1968, 3-305; Code 1990)

The fee for an electrical permit shall be set by resolution. The fee herein shall be paid to the city clerk upon obtaining an electrical permit and the same shall be credited to the general operating fund of the city.

(Code 1990)

A copy of the electrical permit shall be kept on the premises for public inspection during the performance of the work and until the completion of the same. The electrical inspector may require a certified copy of the approved plans to be kept on the premises at all times from the commencement of the work to the completion thereof.

(Code 1990)

Upon the completion of any electrical work covered by this article, it shall be the duty of the person doing such work to notify the electrical inspector and request that it be inspected; after which such work shall be inspected promptly as hereinafter provided.

(Code 1990)

(a)   When any electric equipment is to be hidden from view by the permanent placement of parts of the building, the person, firm or corporation installing the equipment shall notify the building inspector and such equipment shall not be concealed until it has been inspected, approved or authorized by the electrical inspector or until 24 hours, exclusive of Saturdays, Sundays and holidays, shall have elapsed from the time of such notification. On large installations, where the concealment of equipment proceeds continuously, the person, firm or corporation installing the electrical equipment shall give the electrical inspector due notice and inspections shall be made periodically during the progress of the work.

(b)   The electrical inspector shall have the authority to require building contractors to open such work which, in any manner, conceals electrical wiring that has been closed without his or her knowledge or permission, and in no case shall the inspector issue a certificate of approval until satisfied that the work is in accordance with the provisions of this article. The inspector shall also have the right to refuse to issue a certificate of approval on any wiring, that is concealed in such manner that it cannot be fully determined that it has been done in accordance with this article.

(Code 1968, 3-307; Code 1990)

An initial inspection fee and an inspection fee for subsequent inspections required, shall be paid before any electrical installation will be approved or a certificate of approval issued. Inspection fees shall be established by resolution.

(Code 1990)

(a)   When the electrical inspector finds an electrical construction or installation to be in conformity with the provisions of this article, he or she may issue to the person, firm, or corporation performing the electrical construction work or making the installation, a certificate of approval, with duplicate copy for delivery to the owner, authorizing the use of the installation and connection to the supply of electricity.

(b)   When a certificate of approval is issued authorizing the connection and use of a temporary installation, the certificate shall expire at a time to be stated therein and shall be revocable for cause by the electrical inspector.

(c)   In no case shall certificates of approval be issued on electrical construction, installations or parts of installations where the work installed does not conform to the requirements of this article.

(d)   If, upon inspection, the installation is not found to be fully in conformity with the provisions of this article, the electrical inspector shall immediately notify the person, firm, or corporation performing the electrical construction work or making the installation of the existing defects.

(e)   No certificate of approval shall be issued unless the electric conductor or equipment has been installed in strict conformity with the provisions of this article and unless the electrical construction or installation is made in compliance with nationally approved methods of construction for safety to life and property as herein set forth.

(f)   The electrical inspector shall be deemed the judge of whether the installation of electric conductors and equipment has been made in accordance with the requirements of this article.

(g)   No certificate of approval shall be required for any of the following:

(1)   The replacement of lamps, fuses, bulbs or the connection of portable electrical equipment to suitable permanently installed receptacles and replacement of receptacles and switches, lighting fixtures and apparatus where no changes or alterations are made to the wiring;

(2)   Any work involved in the manufacturing, repair or testing of any electrical equipment or apparatus, but not including any permanent wiring; or

(3)   Any work in industrial establishments where inspections come under the scope of other inspection agencies.

(Code 1990)

It shall be unlawful for any person, firm, or corporation to make connection to a supply of electricity to any building or electrical equipment for which an inspection is required, or which has been disconnected by the order of the electrical inspector, until a certificate of approval has been issued by the electrical inspector authorizing the connection and use of such electric supply. The electrical inspector may, at his or her discretion, authorize a temporary connection.

(Code 1968, 3-308; Code 1990)

The electrical inspector shall periodically reinspect existing installations of electrical conductors and equipment. When the installation of any conductors or equipment is found to be in a dangerous or unsafe condition, the person, firm, or corporation owning, using, or operating the installation shall be notified in writing and shall make the necessary repairs or changes required to place the conductors or equipment in safe condition and have the work completed within the period specified by the electrical inspector.

(Code 1968, 3-309; Code 1990)

(a)   If in the judgment of the electrical inspector, after an inspection, any electrical conductors, appliances or equipment in any building are unsafe or dangerous to persons or property, the inspector shall have the power to cause the wires or appliances to be disconnected from the source of electrical energy supplying these conductors or equipment, and may, at his or her discretion, seal the control switches for the same in an open or disconnected position, whereupon he or she shall give notice to the owner, or his or her agent, or by posting such notice at the site and shall also notify the utilities serving the premises. Thereafter, it shall be unlawful for any person to cause or permit electric current to be supplied to the electrical conductors, appliances or equipment so sealed until they shall have been made safe and the inspector shall have issued a certificate of approval to that effect.

(b)   It shall be the duty of the electrical inspector to cause all dead wires, unused poles or electric apparatus on the outside of the buildings or in streets or alleys to be removed at the expense of the owners thereof by giving the owners written notice.

(c)   When the electrical inspector condemns all or part of any electrical installation, the owner may, within 10 days after receiving written notice thereof, file a petition in writing for review of the action of the building inspector by the governing body, upon the receipt of which the governing body shall at once proceed to determine the facts, and within 10 days from receiving the petition make a decision in accordance with their findings.

(Code 1990)

It shall be unlawful for any unauthorized person to, in any manner, change or alter electrical conductors or equipment in or on any building. If in the course of the erection of a building or structure, electrical conductors or equipment are in such position as to interfere with the erection or completion of the structure, notice shall be immediately given the authorized person or firm installing the electrical conductors or equipment, and the needed change shall be made by such authorized person or firm.

(Code 1990)

(a)   Master Electrician. A master electrician, shall certify at least six years of practical experience in the electrical trade doing the type of work he or she will be required to perform, supervise or direct. Two years satisfactory work in an accredited trade school, or a degree in electrical engineering conferred by an accredited college or university and four years practical experience may be accepted in lieu of the foregoing requirements. First time applicants must provide proof of having passed ICBO, Experior or Thomason Prometric Testing.

(b)   Journeyman Electrician. A journeyman electrician, shall certify at least four years of practical experience in the electrical trade doing the type of work he or she will be required to perform, supervise or direct. Two years satisfactory work in an accredited trade school, or a degree in electrical engineering conferred by an accredited college or university and three years practical experience may be accepted in lieu of the foregoing requirements. First time applicants must provide proof of having passed ICBO, Experior or Thomason Prometric Testing.

(c)   Electrical Contractor. Electrical contractors are those persons who are licensed and have in their employ master electricians and others who are qualified and equipped to serve the public in the installation, repairing, replacement, and maintenance of electrical wiring and the installation of fixtures, appliances, motors, and other apparatus using electrical current. For the purpose of meeting the requirements of this section, a master electrician may act as the master electrician for only one electrical contractor. The holder of an electrical contractor’s license shall keep the electrical inspector informed in writing as to the person holding a master electrician’s license in his employ. First time applicants must provide proof of having passed ICBO, Experior or Thomason Prometric Testing.

(d)   Employing Electrician. A master electrician is one who works at the business of electrical wiring himself and employs other certified electricians. First time applicants must provide proof of having passed ICBO, Experior or Thomason Prometric Testing.

(Ord. 1202; Code 2005; Ord. 1399; Code 2022)

(a)   Each electrician or electrical contractor shall before entering upon any electrical construction work subject to regulation by city laws, apply to the city clerk for an electrician’s or electrical contractor’s license and receive the same as hereinafter provided and have in his or her possession a valid license authorizing him, her or it to engage in the trade or occupation of electrician or electrical contractor in the city.

(b)   No permit for any electrical construction work shall be issued for any such work to be performed by an electrician or electrical contractor, as defined, who has not first obtained a license upon making a proper application and payment of the license fee as required.

(c)   It shall be unlawful for any person, firm, company, association or corporation to enter into a contract or agreement with another so as to bring himself, herself, or itself under the definition of an electrician or electrical contractor herein, or to perform any work as an electrician or electrical construction, without first having obtained an electrician’s or electrical contractor’s license issued by the city.

(d)   The contractor shall provide to the city clerk proof of passing the ICBO/Experior Exam.

(Ord. 1234; Code 2006)

Application for an electrician’s or electrical contractor’s license shall be made upon a form to be supplied by the city which shall disclose the name of the applicant, his or her place of business in the city (and home office if a nonresident), the kind of contracting work engaged in, the length of time engaged in such work and places where work has been performed within the past two years. The application shall be signed by the electrician or electrical contractor or his or her authorized agent. The application shall be reviewed by the chief building official for his or her approval. Upon the chief building official’s approval and the payment of the fees hereinafter provided, the city clerk shall issue such license.

(Ord. 1167, Sec. 2)

(a)   Every Electrician, as defined above, shall pay a license fee as set by the fee schedule or resolution for the City of Ellis. Such fee shall be paid biennially for a two-year period or major fraction thereof for a license issued in an even numbered year. Any license issued during an odd numbered year shall be issued upon payment of one-half the biennial license fee.

(b)   Each such license shall be set forth the kind of electrical work in which the licensee may engage. The licensee shall display his or her license at any place where he or she may be engaged in electrical work or produce the same on demand of any city officer. All licenses shall be renewable biennially as in the case of an original license on or before the first day of January of the even numbered year for which issued. All licenses shall be valid for two year terms beginning January 1st of an even numbered year and ending December 31st of an odd numbered year. Not less than 12 classroom hours of trade associated continuing education approved by the City of Ellis are required every two years prior to license renewal approval. Continuing education credits in excess of 12 hours will not carry over from one license renewal period to another. Continuing education may be provided by the local governing body, a nationally recognized trade organization, community college, technical school, or technical college.

(c)   It shall be unlawful for any person, firm, or corporation to contract for any kind of work covered by this article without having a valid license issued by the city to perform such contracts.

(Ord. 1287; Code 2009; Ord. 1399; Code 2022)

An electrician or electrical contractor shall procure and maintain a liability insurance policy in the amount of $100,000 for the death or injury of any one person and $300,000 for the death or injury of any number of persons in any one accident and $50,000 for property damage in any one accident. Such policies of insurance shall be issued by some insurance company authorized to do business in the State of Kansas. An electrician or electrical contractor may qualify as to the insurance requirements by filing a certificate with the city clerk executed by the resident agent of such company stating that the required policy of insurance has been issued by such company for the purpose required by this article and that such insurer will not cancel the policy except upon giving 30 days notice in writing to the city; and that the certificate shall be filed for an annual period beginning January 1 and ending December 31 of such year.

(Code 1968, 3-1007; Code 1990)

(a)   The license of any electrician or electrical contractor may be suspended temporarily, for a period of not to exceed 30 days at any one time, by the chief building official upon his or her own motion or upon a complaint of the city electrical inspector. Notice shall be given in writing to such electrician or electrical contractor giving reasonable notice of a time of hearing of the complaint or the matter alleged against such electrician or electrical contractor involving any one or more of the following:

(1)   Misrepresentation of a material fact by applicant in obtaining a license;

(2)   Use of license to obtain an electrical permit for another;

(3)   Failure or neglect to observe conditions of permit authorizing encumbering of streets or sidewalks for safety of public;

(4)   Performance of any electrical construction work without a permit where one is required by law; or

(5)   Willful disregard of any violation of the electrical construction laws, or failure to comply with any lawful order of the city electrical inspector.

(b)   Any licensee may within 15 days appeal in writing to the governing body from any order of the chief building official suspending his or her license for its final decision thereon. The governing body may upon such hearing terminate such suspension within not more than 30 days thereafter, or may revoke such license. If any license shall be revoked, the electrician or electrical contractor shall not be eligible for a new license during a period of six months thereafter. No fee shall be refunded in event of the suspension or revocation of any electricians or electrical contractor’s license.

(c)   It shall be unlawful to engage in the occupation or trade of electrician or electrical contractor during the time any license of such electrician or electrical contractor has been suspended or revoked.

(Code 1990)

Nothing herein contained shall prohibit any property owner from personally performing any electrical construction or installing electrical wiring or equipment within and upon his or her own residence and intended for his or her personal use and permanent occupancy; provided, the owner shall satisfy the electrical inspector as to his or her ability to perform such work or install such electrical wiring, secure a permit, pay required fees, do work in accordance with this article, and apply for an inspection and receive a certificate of approval. Personal electrical construction or installation performed by an owner under this section shall be by himself, herself, for himself or herself on his or her own residence, without compensation and no person shall be employed to assist him or her in any way on such work except an electrician or electrical contractor licensed by the city.

(Code 1990)

No electric materials for wiring of appliances or equipment shall be installed in the city unless they are in conformity with the provisions of this article and with the approved standards of construction for safety to life and property. Conformity of materials for wiring appliances and equipment to the standards of the Underwriters Laboratories, Inc. shall be prima facie evidence that the materials, devices, appliances and equipment comply with the requirements of this article.

(Code 1990)

This article shall not be construed to relieve from or lessen the responsibility or liability of any party owning, operating, controlling or installing any electrical equipment for damages to persons or property caused by any defect therein, nor shall the city be held as assuming any such liability, by reason of the inspection or reinspection authorized herein, or the certificate of approval of any work or equipment authorized herein or by reason of any permit or license granted herein.

(Code 1968, 3-311; Code 1990)

If any section of the National Electrical Code or of this article shall be held unconstitutional or otherwise invalid by any court of competent jurisdiction, then such section shall be considered separate and apart from the remaining provisions of the National Electrical Code or of this article, the section is to be completely severable from the remaining provisions which shall continue in full force and effect.

(Code 1990)